If you're like me, you probably have grown way too close to the familiar Windows interface. That's OK. I don't adjust well to change either.
After installing XP you may notice the revamped interface looks nothing like the old one. I was completely thrown back when I tried using it for the first time, but I suspect that over time the new interface will begin to grow on you as it has with me.
Therefore, to ease your transition to the new OS, make a simple adjustment to XP to give it that classic look.
Here's how to do it:
Right-click your Desktop and select Properties.
On the Desktop Display properties, click the Appearance tab.
Under the Windows and buttons pull-down menu, select Windows Classic.
Click Apply to see your new look.
Click OK to close the Desktop Display properties.
Wednesday, September 29, 2010
Tuesday, September 28, 2010
Display the Quick Launch Bar
If you have opened more than one program, you might like to display and use the Quick Launch bar. The Quick Launch bar makes it easy to access frequently used programs like Windows Media Player and your e-mail, and to open an Internet Explorer window. Windows XP loads several programs in the Quick Launch, including Show Desktop. One click on Show Desktop minimizes all the programs on your desktop. Another click restores them just as you'd left them.
To display Quick Launch on the taskbar
1. If the Quick Launch bar is not displayed, right-click an empty area on the taskbar and click Properties.
2. On the Taskbar tab, under Taskbar appearance, select the Show Quick Launch check box and click OK.
After Quick Launch is displayed, click Show Desktop to minimize all open programs.
To display Quick Launch on the taskbar
1. If the Quick Launch bar is not displayed, right-click an empty area on the taskbar and click Properties.
2. On the Taskbar tab, under Taskbar appearance, select the Show Quick Launch check box and click OK.
After Quick Launch is displayed, click Show Desktop to minimize all open programs.
Monday, September 27, 2010
Don't Ignore the Windows Logo Key
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don't ignore it. It is the shortcut anchor for the following commands: Windows: Display the Start menu Windows + D: Minimize or restore all windows Windows + E: Display Windows Explorer Windows + F: Display Search for files Windows + Ctrl + F: Display Search for computer Windows + F1: Display Help and Support Center Windows + R: Display Run dialog box Windows + break: Display System Properties dialog box Windows + shift + M: Undo minimize all windows Windows + L: Lock the workstation Windows + U: Open Utility Manager
Sunday, September 26, 2010
Compatibility Mode Make older programs run in Windows XP
If you're having trouble running older programs originally developed for previous versions of Windows, you're not out of luck. Luckily for consumers, Microsoft built Compatibility Mode into XP. Compatibility Mode allows you to run a program using the shell of the original program it was developed for.
Here's how to access a program's Compatibility Mode in XP:
Find the executable or program shortcut icon you'd like to run.
Right-click the icon and select Properties.
Click the Compatibility tab and place a checkmark next to the text labeled "Run this program in compatibility mode."
Select the operating system that the program was originally intended to run on.
You may need to fine-tune the three fields under "Display Settings" if an older program requires 640x480 resolution or 256 colors.
Click Apply.
Try starting the program after making these changes. If it still gives you trouble, try a different operating system. If the program was written for Win95 and worked fine in Win98, there's nothing that says it still won't work fine with Win98.
Here's how to access a program's Compatibility Mode in XP:
Find the executable or program shortcut icon you'd like to run.
Right-click the icon and select Properties.
Click the Compatibility tab and place a checkmark next to the text labeled "Run this program in compatibility mode."
Select the operating system that the program was originally intended to run on.
You may need to fine-tune the three fields under "Display Settings" if an older program requires 640x480 resolution or 256 colors.
Click Apply.
Try starting the program after making these changes. If it still gives you trouble, try a different operating system. If the program was written for Win95 and worked fine in Win98, there's nothing that says it still won't work fine with Win98.
Saturday, September 25, 2010
Convert a FAT Partition to the NTFS File System
To convert a FAT partition to NTFS, perform the following steps.
Click Start, click Programs, and then click Command Prompt.
In Windows XP, click Start, and then click Run.
At the command prompt, type CONVERT [driveletter]: /FS:NTFS.
Convert.exe will attempt to convert the partition to NTFS.
NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).
Convert.exe will attempt to convert the partition to NTFS.
Click Start, click Programs, and then click Command Prompt.
In Windows XP, click Start, and then click Run.
At the command prompt, type CONVERT [driveletter]: /FS:NTFS.
Convert.exe will attempt to convert the partition to NTFS.
NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).
Convert.exe will attempt to convert the partition to NTFS.
Friday, September 24, 2010
XP Animations
You can turn off window animation ("exploding" windows), displayed when you play around with minimizing/maximizing open windows. This makes navigating Windows 95/98/ME/NT4/2000/XP a lot quicker, especially if you don't have a fast video controller, or if you got tired of seeing it all the time (like I did). :)
To do this, run Regedit (or Regedt32) and go to:
HKEY_CURRENT_USER | Control Panel | Desktop | WindowMetrics
or if you are the only user of your Windows computer go to:
HKEY_USERS | .Default | Control Panel | Desktop | WindowMetrics
Right-click on an empty spot in the right hand pane. Select New -> String [REG_SZ] Value. Name it MinAnimate. Click OK. Double-click on "MinAnimate" and type 0 to turn OFF window animation or 1 to turn it ON. Click OK. Close the Registry Editor and restart Windows. Done.
TweakUI, the famous Microsoft Power Toy [110 KB, free, unsupported] can also turn off animated windows.
Just remove the check mark from the "Window Animation" box under the General tab.
To do this, run Regedit (or Regedt32) and go to:
HKEY_CURRENT_USER | Control Panel | Desktop | WindowMetrics
or if you are the only user of your Windows computer go to:
HKEY_USERS | .Default | Control Panel | Desktop | WindowMetrics
Right-click on an empty spot in the right hand pane. Select New -> String [REG_SZ] Value. Name it MinAnimate. Click OK. Double-click on "MinAnimate" and type 0 to turn OFF window animation or 1 to turn it ON. Click OK. Close the Registry Editor and restart Windows. Done.
TweakUI, the famous Microsoft Power Toy [110 KB, free, unsupported] can also turn off animated windows.
Just remove the check mark from the "Window Animation" box under the General tab.
Thursday, September 23, 2010
XP file SharingFile sharing
Is the sharing of a disk or printer between computers . If a disk or folder is shared, everyone on the network can access it. You have the ability to set password and permissions for the shared disk or folder for security therefore Windows XP tries to protect you from some potential security risks.
Right click the disk or folder that you want to share and select Sharing and Security.
NOTE: The first time you do this the Networking wizard will appear ..CLOSE IT..:-
The Wizard automatically enables the Internet Connection Firewall (ICF) to prevent other Internet users from accessing your shared disks and folders. Enabling ICF is a good idea if you connect directly to the Internet through a dial-up, DSL, or cable modem. But it's a terrible idea if you connect to the Internet through your LAN, using a software router (like Internet Connection Sharing) or a hardware router, since it will block File and Printer Sharing.
The disk or folder that you share, along with all of the folders that it contains, will be accessible by other network users. If you're sharing an entire disk, Windows XP gives a warning. The implication of the warning is that it's better to share a specific folder, since only that folder (and its subfolders) will be accessible by others, and the rest of the disk will be inaccessible. Click where indicated if you want to go ahead and share the entire disk. This screen doesn't appear if you're sharing a folder.
XP will display a warning. If you want ICF enabled, select Use the wizard to enable file sharing. Otherwise, select Just enable file sharing.
Having successfully stopped the Wizard's , you now have to specify a Share name, which users on other networked computers will use to access this disk or folder. For maximum compatibility with all versions of Windows, use 1-12 characters.
By default, users on other computers have full access: they can read, write, and delete shared files. If you only want them to be able to read files, un-check Allow network users to change my files.
Warning: If a user has full access, deleting a file doesn't put it in the Recycle Bin. Once it's deleted, it's gone for good.
Hiding a Shared Disk or Folder
What if you don't want everyone on the network to be able to access a shared disk or folder?
The answer is to create a hidden share by adding a dollar sign ('$') to the end of the share name. A hidden share doesn't appear in My Network Places or Network Neighborhood on any of the networked computers. Only people who know the share name can access it.
To create a hidden share, right click the disk or folder and select Sharing and Security.
Specify a share name that ends with a dollar sign. Once again, use 1-12 characters (1-11 before the dollar sign). If the people on your network are clever enough to guess a name like myfiles$, use a more secure name, like a combination of letters and numbers. Just make sure that you can remember it.
Mapping Hidden Drives
Accessing a Hidden Share:
A hidden share doesn't appear on any of the networked computers, so how can someone on another computer access it? The answer is to map it as a network drive, which assigns a drive letter to the hidden share. Once it has a drive letter, you access it just like a disk on the same computer.
To map a network drive, open My Computer, click Tools, and select Map Network Drive.
Specify an unused drive letter and enter the network path for the hidden share, being sure to include the dollar sign. If you check Reconnect at logon, the mapping will happen automatically every time you start your computer. Otherwise, you'll have to map it manually every time.
Right click the disk or folder that you want to share and select Sharing and Security.
NOTE: The first time you do this the Networking wizard will appear ..CLOSE IT..:-
The Wizard automatically enables the Internet Connection Firewall (ICF) to prevent other Internet users from accessing your shared disks and folders. Enabling ICF is a good idea if you connect directly to the Internet through a dial-up, DSL, or cable modem. But it's a terrible idea if you connect to the Internet through your LAN, using a software router (like Internet Connection Sharing) or a hardware router, since it will block File and Printer Sharing.
The disk or folder that you share, along with all of the folders that it contains, will be accessible by other network users. If you're sharing an entire disk, Windows XP gives a warning. The implication of the warning is that it's better to share a specific folder, since only that folder (and its subfolders) will be accessible by others, and the rest of the disk will be inaccessible. Click where indicated if you want to go ahead and share the entire disk. This screen doesn't appear if you're sharing a folder.
XP will display a warning. If you want ICF enabled, select Use the wizard to enable file sharing. Otherwise, select Just enable file sharing.
Having successfully stopped the Wizard's , you now have to specify a Share name, which users on other networked computers will use to access this disk or folder. For maximum compatibility with all versions of Windows, use 1-12 characters.
By default, users on other computers have full access: they can read, write, and delete shared files. If you only want them to be able to read files, un-check Allow network users to change my files.
Warning: If a user has full access, deleting a file doesn't put it in the Recycle Bin. Once it's deleted, it's gone for good.
Hiding a Shared Disk or Folder
What if you don't want everyone on the network to be able to access a shared disk or folder?
The answer is to create a hidden share by adding a dollar sign ('$') to the end of the share name. A hidden share doesn't appear in My Network Places or Network Neighborhood on any of the networked computers. Only people who know the share name can access it.
To create a hidden share, right click the disk or folder and select Sharing and Security.
Specify a share name that ends with a dollar sign. Once again, use 1-12 characters (1-11 before the dollar sign). If the people on your network are clever enough to guess a name like myfiles$, use a more secure name, like a combination of letters and numbers. Just make sure that you can remember it.
Mapping Hidden Drives
Accessing a Hidden Share:
A hidden share doesn't appear on any of the networked computers, so how can someone on another computer access it? The answer is to map it as a network drive, which assigns a drive letter to the hidden share. Once it has a drive letter, you access it just like a disk on the same computer.
To map a network drive, open My Computer, click Tools, and select Map Network Drive.
Specify an unused drive letter and enter the network path for the hidden share, being sure to include the dollar sign. If you check Reconnect at logon, the mapping will happen automatically every time you start your computer. Otherwise, you'll have to map it manually every time.
Subscribe to:
Posts (Atom)